|
Halltech Super Hornet (C8 Z06) pre-order list
|
|
Halltech Hornet (C8 Stingray Coupe & HTC, E-Ray)
|
|
|
(5)
|
|
|
|
|
Introducing the patent pending HALLTECH SUPER HORNET ... Halltech's C8 Corvette Z06 cold air intake. Purchase this $0 item to get on the official preorder list.
- Will require no modifications and no tuning.
- The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations.
- You will reuse your stock t/b connector hoses, left and right inlet ducts, and mounting bolts.
- Our huge filters have over 600 square inches of filtration. 3 filter options will be available (Bumble Blue dry filter, Red Bee oiled filter, or gray Murder Hornet race filter)
- Our molded-in velocity stacks and reverse flow funnels ensures laminar flow at both MAF sensors
- filter box is made from military grade XLPE
- patent pending
- engineered and designed for the C8 Z06
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
|
Introducing the patent pending HALLTECH HORNET-518 ... Halltech's C8 Corvette Stingray & E-Ray cold air intake. Now shipping!
- Our direct CAI replacement requires no modifications and no tuning.
- We've dynoed a 17+ increase in horsepower and 25+ increase in torque on the Stringray. Results have varied in the industry, so we will post video links to other tests for transparency.
- The stainless backplate ensures all harness fasteners and the antenna are attached in their factory locations.
- You will reuse your stock t/b connector hose, pcv fitting, left and right inlet ducts, and mounting bolts.
- Our huge Blue-Bee dry nano filter has over 600 square inches of filtration (made by Attack Blue)
- Our molded-in velocity stack and reverse flow partition ensures laminar flow at the MAF sensor
- filter box is made from military grade XLPE
- patent pending
- engineered and designed for the E-Ray & the Stingray Coupe and HTC (the only modification required for the HTC is to simply drill-out the top center rivnut on the access panel)
- the intake of choice for performance packages across the country, including Paragon and Lingenfelter to name a few.
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
|
|
|
|
Halltech C6 DRED Hood pre-order list
|
|
Halltech C6 Killer Bee™ MF103 2005-2007 C6 LS2 Conversion Package
|
|
|
(1)
|
|
|
|
|
|
"Purchase" this $0 item to get on the official preorder list
Resurrection of the Halltech DRED Hood.
- This hood is made from primered/paintable carbon fiber outer skin and prepreg clear bottom.
It features the same type of Direct Radiator Exit Design as seen in the C6-R Pratt and Miller Specialty C6 Corvette as seen in the accompanying picture. The Blue Halltech C6 ULZ750 is the configuration we are starting with, but once production starts, we might have different configurations. In May we are making one hood, which is already dedicated to a customer, but only after we do our due diligence, and have acceptance from this individual.
No deposit required at this time, but ordering will give us an idea of the commitment we need to make to our vendor.
|
Halltech's Killer Bee™ MF103 2005-2007 C6 LS2 Conversion Package will provide airflow to 950 HP on the Z06, so it may be overkill for the average LS2. The package includes:
- the all new Killer Bee™ MF103 Cold Air Induction System designed for the Z06,
- a probe style LS3 style probe MAF sensor,
- our H108124 MAF adapter harness (Hi-Density 5 pin to GT),
- and our proprietary Halltech Beehive™ heat shield.
This package was on our company LS2 for many years, and over 40,000 miles, drag testing and road racing. It WORKS! This intake system REQUIRES MAF TABLE CONVERSION. They may need to be tweaked a bit, but you will get the car running with the stock LS7 (Z06) MAF tables.
We do not recommend cutting any holes in your radiator shroud (in an attempt to get more air to the filter). It is not necessary, and will cause lean codes and surging.
All systems now ship with our new dry nano filter, private labeled exclusively for Halltech by TKO (makers of the Attack Blue filter).
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
|
|
|
|
Halltech C5 Killer Bee™ II 1997-2000 C5 LS1 Conversion Package
|
|
Halltech C6 Venom™(2005-2007 LS2) includes Beehive Heat Shield
|
|
|
(1)
|
|
|
|
|
Halltech 97-2000 C5 Killer Bee™ Conversion Package LS1:
Halltech High Flow Killer Bee™ II induction intake
Halltech Blue Bee 15" filter with velocity stack
Provision for your A.I.R. Pump if required (default is delete)
Halltech H108125 MAF Adapter 3 pin w/ IAT to GT Pigtail Wire harness
GM new MAF sensor (probe style from the LS7/LS3)
Halltech tested MAF tables for the ECM
Test results
Facts: expect to gain +24 HP (see attached dyno) vs. the stock intake and +12 RWHP over the Vararam (see dyno) The Halltech Killer Bee™ II 1997-2000 C6 LS1 Conversion Package will provide airflow to 800 HP on the LS1, so it may be overkill for the average LS1. The package includes the all new C5 Killer Bee™ II Cold Air Induction System designed originally for the C6Z06, and includes our H108125 MAF Adapter 3 pin w/ IAT to GT Pigtail and the probe style LS7 MAF sensor, Reprogramming the MAF curve is not optional since the new probe style MAF requires a totally different curve. We will make the MAF transfer curve tables available free of charge if you email [email protected]. They may need to be tweaked a bit, but you will get the car running with our MAF calibration tables.
We do not recommend cutting any holes in your radiator shroud (in an attempt to get more air to the filter). It is not necessary, and will cause lean codes and surging.
All systems now ship with our new dry nano filter, private labeled exclusively for Halltech by TKO (makers of the Attack Blue filter).
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
|
Halltech C6 Venom™ II is the direct replacement for the stock LS2 intake box. Bolt on 15 RWHP/12 lbs ft torque with our all new design. Now with a larger 106.7mm inlet and built in velocity stack, no other bolt on will make more power. This intake is made from the same mold as the Killer Bee™ II that dynoed +15 HP/+14lbs-ft. on the Katech Engine Development Superflow dyno. The same huge high flow Attack Blue Filter will flow over 1250 cfm, and feeds over 900 HP easily. This system uses the stock wiring, and MAF sensor for direct bolt on power that will not void your warranty. The Halltech Beehive is included in our pricing. We now include our HC.125 honeycomb flow straightener with your purchase. No tuning required. MAF sensor not included.
We do not recommend cutting any holes in your radiator shroud (in an attempt to get more air to the filter). It is not necessary, and will cause lean codes and surging.
All systems now ship with our new dry nano filter, private labeled exclusively for Halltech by TKO (makers of the Attack Blue filter).
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
|
|
|
PEOPLE TRUST 
"This is my first mod to any of my Z06's. The filter feels great. Feels better when running thru
gears at part gas."
- DALE P.
"It ran like a different car at wide open throttle, the SOTP meter was off the charts, it feels like
a 100 shot of
nitrous. For the money, it's a bargain"
- WALTER S.
"I've upgrade my car's ECM with the tuned file (stock filter) that you've sent; and let me tell you
the car gone "mad"!!
... Seriously the feeling is brutal and I love it."
YOUSUF H.
|
